抄録
This paper presents the methodology of the CTOD fracture toughness correction for wide plates' welded joints from lower to upper ductile-brittle transition temperature region. Tensile plastic zone size criterion is adopted in lower transition region. The equivalent CTOD ratio, β r , is adopted in ductile-brittle transition and upper transition region. The equivalent CTOD ratio is defined as the ratio of CTOD in a standard fracture toughness specimen to CTOD in a wide plate with welding residual stress at the same level of the Weibull stress. Fracture assessments for "After Weld Notch" and "Before Weld Notch" type welded joints have been conducted by applying the toughness correction methodology. It has been found that an excessive conservatism observed in the conventional procedure is reasonably reduced by applying the proposed methodology.
