-
Tomoaki SATO, Masanori KUMAGAI, Toshio AMANO, Nobuaki OGAWA
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
653-660
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
Using a portable near-infrared (NIR) spectrometer and a principal-component analysis, we discriminated Japanese sake and added a chemical explanation for the discrimination. From a wavelength contribution spectra, which were obtained by a principal-component analysis of the NIR spectra data, we extracted and found high contribution of alcohol-CH
3, -CH
2-, R-OH for the first principal component (PC1), protein-NH
2, -CONH
2, -CONH-, -CH
3, -CH
2- for PC2, and starch-CH
3, -CH
2-, and starch-OH for PC3. The differences between the NIR spectra discriminated “Junmaishu” and the other in PC1, “Daiginjoushu” and the other in PC2, and three groups (“Junmai-daiginjoushu” and “Honjouzoushu”, “Futuushu” and “Daiginjoushu”, “Junmaishu”) in PC3, respectively. This shows that “Futuushu” and “Honjouzoushu” have approached in spectral means to “Daiginjoushu” and “Junmai-daiginjoushu”, which are generally appreciated in the market, by adding brewing-alcohol, saccharides, and acidulant etc. We can demonstrate that a portable and
in situ measurable PlaScan-SH is very useful for the discrimination of Japanese sake. Furthermore, we suggested that by using the base of those kinds of data and chemical information obtained in this study, one could brew and produce an appreciated, modern and popular Japanese sake for the market.
View full abstract
-
Hideyuki HISANABE, Yasuro NIIDOME, Hironobu TAKAHASHI, Sunao YAMADA
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
661-664
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
Gold nanoparticles were successfully deposited onto a poly(tetrafluoroethylene) (PTFE) membrane filter by pulsed 532-nm laser irradiation in a 2-propanol solution containing HAuCl
4. The resulting membrane filters were used as substrates for infrared (IR) absorption spectrometry. A substantial enhancement in the IR spectrum of L-cysteine was observed by using this substrate. The degree of enhancement was roughly twice compared with the case of PTFE membrane filters without gold nanoparticles.
View full abstract
-
Takayasu SUGIHARA, Hiroki HOTTA, Toshiyuki OSAKAI
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
665-671
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
L-ascorbic acid (AsA), a water-soluble antioxidant, is known to exhibit a synergistic inhibition of oxidation by reacting with a lipophilic antioxidant, such as vitamin E, at biomembrane surfaces. In this study, we electrochemically investigated the oxidation of AsA by chloranil (Q) at a nitrobenzene (NB)/water (W) interface, which is considered to be the simplest model of a biomembrane, by using a four-electrode electrolytic cell. The cyclic voltammograms obtained by changing the pH of the W phase and the concentrations of AsA and Q were analyzed using a digital simulation technique. Regression analyses based on various reaction mechanisms have supported the previously proposed mechanism in which the oxidation of AsA occurs not at the NB/W interface, but homogeneously in the W phase. However, it has been clarified that the two electron oxidation of AsA occurs in two one-electron steps.
View full abstract
-
Katsuyuki MAENO, Mitsuru ABO, Akira OKUBO
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
673-678
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
An enzymatic glucose sensor for visual measurements was constructed using glucose oxidase (GOD), catalase (CAT) and redox dyes. Enzymes and viologen dyes were entrapped in silica gel on the inner surface of a glass tube by means of the sol-gel method. Viologen dye has blue color in its reduced form and no color in its oxidized form. First, sodium dithionite was introduced into the glass tube and viologen dye was reduced. A sample was then introduced. The color of the glass tube faded due to soluble oxygen in the sample solution, but it took more time to fade the color in the presence of glucose, because glucose oxidase and catalase, which were entrapped in the gel, consumed soluble oxygen. Based on the color fading time or the color fading length, the glucose in sample solution was quantified. The quantification range was between 0.1 and 10 mM and the RSD was within 4%. The fading color simulation of this sensor was programmed and performed. The simulation results were compared with the experimental data.
View full abstract
-
Kenji IZUMOTO, Megumi KASUNO, Yumi YOSHIDA, Sorin KIHARA
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
679-687
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
Voltammograms for transfers of various ions from an aqueous solution,
W, to 1,2-dichloroethane,
DCE, in the presence of highly concentrated sucrose (up to 2.4 mol dm
−3) or urea (up to 9.8 mol dm
−3) in
W were successfully recorded by employing a micro
W|
DCE interface. It was found based on the analysis of voltammograms observed that the highly concentrated sucrose or urea gave considerable influences on the diffusion of alkylsulfonate, alkali metal, alkaline earth metal or halide ions and the long-distance interaction between an ion and water. This result could be attributed to the effect of sucrose or urea on the viscosity and the relative dielectric constant of
W. On the other hand, the Stokes radius of an ion in
W, the formation energy of a cavity to dissolve a neutral molecule in
W and the short-distance interaction between an ion and water molecules were not significantly influenced by sucrose or urea added in
W, which does not support the view that sucrose or urea works as a structure-forming or -breaking agent, respectively. It was also found that the effect of urea on the denaturation of a protein in
W was similar to that on the formation energy of a cavity in
W.
View full abstract
-
Norio YOSHIOKA, Setsuko YAJIMA, Keiichi KIMURA
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
689-694
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
We have been studying neutral carriers of ion-selective electrodes (ISEs) for soft metal ions, and have reported that π-coordinate calixarene derivatives are useful for detecting soft metal ions selectively. In this study, in order to investigate what structures are essentially needed for detecting soft metal ions, several π-coordinate aromatic compounds were chosen as neutral carriers of ISEs, and the ion sensor properties were examined. An
1H-NMR study showed that
t-butylcalix[4]arene tetra(allyl ether) and [2.2.2]-paracyclophane interact with silver ions powerfully, and that only
t-butylcalix[4]arene interacts with thallium ions. Therefore, ISEs based on [2.2.2]-paracyclophane exhibited excellent silver ion sensor properties.
View full abstract
-
Rie HANDO, Mitsuru ABO, Akira OKUBO
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
695-699
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
A sample preparation for the determination of alkylphenols and bisphenol A in surface seawater by GC/MS were studied. We improved the methods for the conditioning and elution of solid-phase extraction (SPE) in order to obtain accurate values by an easier method. We devised a method for conditioning the absorbents in order to prevent contamination from the used water. The error was less than 1 percent compared with that of the usual conditioning method. We designed an elution method in which the dispersion is small and the recovery is better than that for many other reported methods. We measured the surface water in Tokyo Bay and off the coast of Chiba. In Tokyo Bay, nonylphenol (mix) and bisphenol A were detected from tens to hundreds ng/l. The results of measurements of the surface water off the coast of Chiba showed that the concentrations of the subject compounds were no more than one tenth compared with samples from Tokyo Bay, although several subject compounds were detected.
View full abstract
-
Naoko SASAKI, Hideaki MONJUSHIRO, Hitoshi WATARAI
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
701-705
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
We studied the fabrication of a new centrifugal liquid membrane (CLM) cell with two electrodes, which can be used in electro-spectrochemical measurements for liquid/liquid two-phase systems. Two fabrication methods for preparing the electrodes, the chemical plating of Au and the sticking of Pt foils (width 5 mm, thickness 20 μm) on the inner surface of the CLM cell, were examined. It was elucidated that a CLM cell with Pt foils worked well as an electrochemical cell. To evaluate the CLM-electrode system, the electrolytic reduction of water-soluble porphyrin (Mn
IIITPPS) was examined. A controlled-potential electrolysis was carried out while rotating the CLM cell, and the UV-visible spectra were recorded. The electrolytic reduction of Mn
IIITPPS was successfully observed as a change in the absorption spectrum. The spectral changes with electrolysis were observed under two conditions: with a single aqueous solution and an aqueous solution/
n-dodecane two phase system. It is concluded that the new CLM cell with Pt electrodes has a good ability to perform electro-spectrochemical measurements for liquid/liquid two-phase systems.
View full abstract
-
Yasumasa GOTO, Kumiko MIYAZAKI, Hiroyuki HATTORI, Akio YUCHI
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
707-711
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
Bis(pentafluorobenzyl)tin(IV) dibromide was synthesized as a novel ionophore having a relatively high Lewis acidity. The performance of this ionophore as a carrier of a phosphate ion-selective electrode was strongly dependent on the membrane solvent. Using a mixture of DOS and DMF as a membrane solvent, a larger potential slope (−70.8 mV/decade), a lower detection limit (10
−5 mol dm
−3), and a higher selectivity were obtained at a lower pH of 3, compared with the parent compound, bis(benzyl)tin dichloride. An increase in carrier concentration in the membrane phase did not change the potential response but elongated the life time of the electrode.
View full abstract
-
Nobuyuki TAKAHASHI, Shingo SAITO, Hitoshi HOSHINO
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
713-718
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
For the purpose of finding ligand designing strategy for lanthanoids energy-transfer luminescence, formation reactions of 4-hydroxypyridine-2,6-dicarboxylic acid (chelidamic acid, CDA) with terbium(III) and europium(III) ions in aqueous solution were investigated. A luminescent complex species having 1 : 3 stoichiometry was formed at pH 8.4∼11.6. Those complexes were hydrolyzed by more alkaline solution. The relative quantum yield of Tb(III)-CDA complex at pH 11.6 was 0.636 (λ
em = 544 nm) on a quinine sulfate basis. The luminescence lifetimes of Tb(III)-CDA were calculated as 1.02 ms at pH 8.4 and 1.55 ms at pH 11.6. The luminescence intensities of Tb(III) and Eu(III)-CDA complexes increased from pH 9 to 11 with the deprotonation degree of the 4-hydroxyl group on the complexes. The deprotonated Ln(III)-CDA complex species possibly has a resonance structure of the pyridone type, which would contribute to the highly enhanced luminescence intensity. Detailed photophysical data in terms of photoexcitation and the triplet energy level (low temperature phosphorescence) are given.
View full abstract
-
Maki IWANO, Ayumi HIRANO, Atsuko NISHIGAKI, Masami SHIBUKAWA
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
719-724
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
A reversed-phase ion-pair high-performance liquid chromatographic method for the determination of trace amounts of aluminum was developed using 5-sulfo-8-quinolinol as a pre-column derivatization reagent for spectrophotometric detection. All of the experiments were carried out in a class-100 clean room to avoid the contamination of aluminum from the laboratory environment. The calibration curve of aluminum standard solutions was linear over the range of 0.5∼100 ppb with a correlation coefficient of 0.997 and relative standard deviations of 0.49∼1.65%. The limit of detection, defined as three-times the standard deviation of the blank signal, was found to be 0.05 ppb. This method was successfully applied to the determination of trace levels of aluminum in several commercial drinking water and tap water samples.
View full abstract
-
Yoko TERADA, Akemi HARADA, Keiitsu SAITO, Satomi MURAKAMI, Akihiko MUR ...
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
725-729
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The extraction behavior of platinum(II) with 1,3-dimethyl-2-thiourea (DMTU) from a chloride solution was studied. Bromocresol Green ion as a counter anion and 1,2-dichloroethane as an extraction solvent were used. Because the maximum absorbance was observed at a wavelength of 413 nm, the extraction efficiency was followed by a measurement of the absorbance at 413 nm of the organic phase. Because the extraction rate of platinum(II) with DMTU was fast, platinum(II) was quantitatively extracted into 1,2-dichloroethane within 15 min. The effects of the pH, the DMTU concentration and the chloride concentration on the extraction of platinum(II) were examined. The constant and maximum absorbance were obtained over the pH range from 3.3 to 4.2. A constant absorbance was obtained at more than 0.02 M DMTU, and the chloride ion concentration did not affect the extraction of platinum(II) at below 0.5 M. In order to apply to the spectrophotometric determination of platinum(II), the interferences of eight kinds of metal ions and three kinds of anions were examined. Sulfate, nitrate, perchlorate, cobalt(II) and nickel(II) did not interfere. The interferences from manganese(II), copper(II), zinc(II), palladium(II), silver(I) and cadmium(II) were found to be depressed by extraction separation with 1,5,9,13-tetrathiacyclohexadecane (TTCH) and the addition of EDTA.
View full abstract
-
Takahiro UCHIDA, Takashi YASUI, Tetsuyoshi NAITO, Hiromichi YAMADA
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
731-739
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
From the standpoint of the development of a less toxic solvent, the ion-pair extraction of 2-(2-pyridylazo)-1-naphthol-4-sulfonate(α-PAN-4S anion: HL
− and L
2−), its metal(II) complex anions(ML
22−: M = Fe(II), Ni(II), Cu(II), and Zn(II)) and 2-(2-pyridylazo)-1-naphthol-6-sulfonate(α-PAN-6S anion: HL
− and L
2−) with tetrabutylammonium cation(Q
+) using the 1-nonanol/octane mixed solvent were carried out at 25°C. The partition and stepwise formation constants of respective ion-associates were determined according to an analysis of the respective extraction equilibria. The ion-pair formation constants on the sulfonate substituent with tetrabutylammonium cation in the aqueous phase were found to be dependent on the concentration of 1-nonanol in the mixed solvent, but those on the naphtholate to be independent of it. The partition constant(log
KD) of each ion-pair was found to increase linearly with the concentration of 1-nonanol in the mixed solvents. With respect to the ion-pair, (Q
+)
2•ML
22−, the slope of the plots of log
KD against [ROH]
o increases in the order: Q
2•FeL
2 < Q
2•NiL
2 < Q
2•CuL
2 ≤ Q
2•ZnL
2. This suggests that the affinity of the ion-pair to 1-nonanol increases in this order. The difference between the respective partition constants was observed to increse with increasing the concentration of 1-nonanol for each ion pair, (Q
+)
2•ML
22−. To the contrary, it was found to become smaller with decreasing the concentration of 1-nonanol, and can be expected to become vanishingly small in the pure octane solvent systems.
View full abstract
-
Tomokazu KATO, Kimihiko ABE, Kazumi NAKAMURA, Masaki TACHIBANA, Hitosh ...
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
741-745
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
Glucose (G1) and maltooligosaccharides (G2∼G7) were separated by reversed phase liquid chromatography (RPLC) with C30 stationary phase using McIlvaine’s buffer solution (pH 5.0) as mobile phase and determined with immobilized enzyme post-column reactors followed by chemiluminometric detection. The oligosaccharides were hydrolyzed to glucose by an immobilized amyloglucosidase column reactor and then the glucose produced was oxidized by an immobilized pyranose oxidase column reactor. The hdrogen peroxide formed was detected by measuring chemiluminescence emitted on admixing with luminol in an immobilized peroxidase packed flow cell. Anomers of G3∼G7 were separated and α- and β-anomer peaks for each oligosaccharide were identified by using glucose oxidase reaction. The detection limits (
S/
N = 3) for G1, G2, G3, G4,G5, G6 and G7 were 8, 8, 8, 10, 10, 300 and 500 nM (20 μl sample), respectively. The RPLC system was applied to the determination of maltooligosaccharides in a soft drink.
View full abstract
-
Ryoko FUKUMORI, Yukiko SENGA, Minoru OKUMURA, Kaoru FUJINAGA, Yasushi ...
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
747-753
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
Hydroxylamine has been determined by combining oxidation to nitrite with iodine and the usual Griess-Romijin method. This iodine oxidation technique, however, has been inapplicable to the determination of hydroxylamine in environmental water due to interferences from nitrite and salinity. We developed a pretreatment method for determining hydroxylamine in environmental water based on the above-mentioned technique. Nitrite in a water sample was converted to a red azo dye with sulfanilic acid (diazo component) and
N-1-naphthyletylenediamine (coupling component); the azo dye was then removed using a Sep-Pak C
18 cartridge. We thus prepared a nitrite-free water sample. On the other hand, the interference from the salinity was solved by adding artificial seawater to sample to enhance the salinity to greater than 5‰. The salinity in a standard solution of hydroxylamine for a calibration curve was also prepared using the standard solution with >5‰. In addition, the proposed method using a Sep-Pak C
18 cartridge was applicable to concentrate azo dye derived from hydroxylamine in water samples.
View full abstract
-
Ryotaro HAYASHI, Takashi HAYASHITA, Takashi YOSHIKAWA, Kazuhisa HIRATA ...
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
755-762
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The selective proton-driven transport of Pb
2+ ion by novel polymer inclusion membranes (PIMs), which were composed of cellulose triacetate (CTA) as a membrane support,
o-nitrophenyl octyl ether (NPOE) as a membrane plasticizer, and proton-ionizable polyethers
1∼
6 bearing different alkyl chain lengths from heptyl to hexadecyl as a metal ion carrier, were carried out. Due to a low solubility in NPOE, the PIMs with carriers
5 and
6 having dodecyl and hexadecyl chains exhibited no transportability for both Pb
2+ and Cu
2+. On the other hand, the selective transport of Pb
2+ over Cu
2+ was noted for PIMs with carriers
1∼
4. To elucidate the transport mechanism, the contribution of several factors, such as the membrane thickness, source-phase pH, carrier concentration in the membrane, and source solution concentration to the Pb
2+ and Cu
2+ ion flux across the PIM were examined. These factors were found to be well described by an analysis based on a carrier-mediated transport mechanism. The observed diffusion coefficient of a Pb
2+ complex with
2 was 7×10
−12 m
2 s
−1, which was comparable with that of metal complexes with crown ether carriers in a NPOE-based liquid membrane. The transport selectivity of the PIM with
2 was Pb
2+ > Cu
2+ > Cd
2+ > Zn
2+ > Ni
2+, which was consistent with the extraction selectivity of
2. The superior durability of CTA-based PIM compared with poly(vinyl chloride)-based PIM was confirmed by replicate experiments. The durability of CTA-based PIM was also supported by a scanning electron microscope analysis.
View full abstract
-
Nobumitsu NIINA, Hitoshi KODAMATANI, Keiitsu SAITO, Shigeo YAMAZAKI
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
763-767
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The chemiluminescence (CL) of tris(2,2'-bipyridyl)ruthenium(III) cation was applied to the determination of tetramethylthiuram disulfide (TMTD). In this work, a sample was injected to an HPLC system with Chromolith Performance RP-18e. The elueted sample and CL reagent were mixed, and sent to a CL-detector. The detection limit of TMTD using the HPLC system was 0.15 pmol (
S/
N = 3). The calibration curve was linear over the injection amount range from 0.6 to 20 pmol. To improve the sensitivity of the CL method, the water that generated the background was removed from the system. As a result, the sensitivity was improved.
View full abstract
-
Takumi NAKAMURA, Emi ASADA, Yoshiko NAGATA, Hideko KANAZAWA
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
769-773
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
Catechins, major polyphenol constituents of green tea, are well known because of their antioxidant activity and chemopreventive effects against cancers. We determined catechins (catechin (C), epicatechin (EC), epigallocatechin (EGC), epicatechin gallate (ECG), epigallocatechin gallate (EGCG) and gallocatechin gallate (GCG)) in bottled green tea drinks. The effects of temperature on the conversion of EGCG to GCG by a heat treatment were examined. The epimerization reaction seemed to proceed slowly around 80°C, and was observed to occur rapidly at 98°C. In this study, we also investigated the effect of metabolic inhibition against CYP3A4 by individual catechins. The inhibition effects of the gallate catechins were greater than those of non-gallate catechins.
View full abstract
-
Hirobumi HOSHINO, Akira OHASHI, Kousaburo OHASHI
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
775-780
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The extraction of gallium(III) with 8-quinolinol derivatives (HA), such as 5-(2,2,2-trifluoroethoxymethyl)-8-quinolinol (HFO
2Q) and 5-(ethoxymethyl)-8-quinolinol (HO
2Q), from a weakly acidic solution into chloroform, was investigated both in the absence and presence of 3,5-dichlorophenol (Hdcp) as a synergist. The acid-dissociation constants of HA in an aqueous solution and the distribution constants of HA between chloroform and water were determined. Although HFO
2Q has a trifluoroethoxymethyl group, which is more hydrophobic than an ethoxymethyl group, the distribution constant of HFO
2Q was found to be lower than that of HO
2Q. HFO
2Q exhibited a higher extractability toward gallium(III) than 8-quinolinol and HO
2Q. The extractability of gallium(III) with HA was enhanced upon the addition of Hdcp due to the formation of an association complex between Ga(A)
3 and Hdcp. The compositions of gallium(III)-HA complexes extracted both in the absence and presence of 3.00×10
−4∼3.00×10
−2 mol dm
−3 Hdcp were assigned to be Ga(A)
3 and Ga(A)
3•
nHdcp (
n = 1, 2), respectively. However, the formation of Ga(A)
3•2Hdcp was not observed in the HFO
2Q system, suggesting that the association of the second Hdcp with Ga(FO
2Q)
3•Hdcp was interfered by the trifluoroethoxymethyl group of HFO
2Q.
View full abstract
-
Makoto NISHIMOTO, Kazuhiko MATSUOKA, Kazuhito NAGAYAMA, Takashi HATA, ...
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
781-785
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
Local anesthetics are known to be typical drugs which act directly on biomembranes. However, the molecular mechanism of anesthetic action is still uncertain. In order to clarity the action mechanism, the partition coefficient of anesthetics to lipid membranes is necessarily important. Most local anesthetics in clinical use are tertiary amine compounds that exist in neutral and/or positively charged species, depending on the pH of the solution. In this study, we prepared coated wire electrodes sensitive to the local anesthetic dibucaine cation, and determined the partition coefficient of anesthetics into a lipid membrane. Moreover, we focused our attention on the pH-dependence of the partition coefficient in order to elucidate the contribution of charged- and uncharged-dibucaine to the lecithin membrane/buffer partition coefficients. The lecithin membrane/buffer partition coefficient was directly determined by the dibucaine cation sensor as a function of the anesthetic concentration and the pH. The limiting partition coefficient extrapolated to infinite dilution was employed because the values of partition coefficients were dependent upon the dibucaine concentration. The limiting partition coefficient increased with an increase in the pH. This means that uncharged species increased with an increase in the pH because pKa of dibucaine is 8.72 at 25°C. The partition coefficients of charged and uncharged dibucaine into the lecithin membranes were estimated from the pH-dependence of the limiting partition coefficients. The partition coefficients were 1.6×10
4 and 8.6×10
6 for charged and uncharged dibucaine, respectively. The electrodes were applied satisfactorily for determining for the partition coefficient of local anesthetic dibucaine into biomembranes.
View full abstract
-
Takahiro YAMAGUCHI, Naoki MITAMURA, Akihiro TAKEUCHI, Tetsuo HASHIMOTO
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
787-793
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The changes into TL property from quartz slice samples accompanied by a thermal treatment for 100 h at 1100°C were studied using IR absorption spectra and a measurement of the α-β transition temperature. Both BTL and weak BTL parts, having a 470 nm peak, from the original quartz slice were unexpectedly changed into an intense RTL-property, giving bands at around 380 nm and 630 nm after annealing. The distribution patterns due to OH-impurities from the IR absorption spectra showed an inverse correlation to the color center images (CCIs) and the TLCIs before the thermal treatment. The denser CC and RTL-parts appeared after annealing from the opposite BTL patterns in the original slice. A similar tendency was found concerning OSL phenomena. The α-β transition temperatures from a colorless (or weak BTL) part, corresponding to a higher impurities part, were apparently related to the prominent changes of the luminescence properties; the thermal annealing procedure brought about into 570.3°C from 571.6°C in the colorless part, while almost constant temperature of 572.5°C maintaing in color part in the original quartz slice.
View full abstract
-
Saori ISHIOKA, Yukako TAOKA, Yutaka ITABASHI
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
795-803
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
A facile method for the determination of molecular species of phosphatidylglycerols (1,2-diacyl-
sn-glycero-3-phospho-1'-
sn-glycerol, PG) is described. Intact PG isolated from spinach leaves and
Escherichia coli IAM12119 was converted into
bis(3,5-dinitrophenylurethane) derivatives, followed by reversed-phase high-performance liquid chromatography (HPLC) on an ODS column (25 cm×4.6 mm i.d., 5 μm particle size) using methanol/water/aqueous ammonium hydroxide (95 : 5 : 0.1 or 93 : 7 : 0.1, v/v/v) as the mobile phase, which gave clear resolution of individual molecular species containing saturated and unsaturated fatty acids. Peaks were detected at 254 nm UV. Reversed-phase HPLC in conjunction with negative electrospray ionization mass spectrometry (ESI-MS) gave a weak [M+2H−
bis-DNPU−RCO]
− ion in addition to a prominent pseudomolecular [M−H]
− ion, by which individual molecular species could be identified.
View full abstract
-
Shin-ichiro YORIKUNI, Yasunori MAKITA, Izuru MATSUBAYASHI, Yuko HASEGA ...
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
805-810
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
Lanthanoids(III) were extracted from a 0.1 M (1 M = 1 mol dm
−3) NaClO
4 aqueous solution into chloroform with 2-thenoyltrifluoroacetone (TTA, HA) and triphenylphosphine oxide (TPPO, B). By analyzing the extraction data, the formation constants, (β
n = [LnA
3•
nB]
o[LnA
3]
o−1[B]
o−n,
n = 1 and 2), were determined. The hydration number of the complexes prepared by solvent extraction was also determined across the lanthanoid series. The results suggest that since more than two water molecules are released from LnA
3 on the first complexation with TPPO, the heavier lanthanoids(III) do not possess any water molecules to be released upon the second complexation. Accordingly, the second complexation should be less favorable entropically. This should contribute to the values of the formation constants of the second complex to be smaller along with increasing the lanthanoid atomic number.
View full abstract
-
Takahiko NINOMIYA, Koji OSHITA, Mitsuko OSHIMA, Shoji MOTOMIZU
Article type: Research Papers
2003 Volume 52 Issue 9 Pages
811-817
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
A chitosan-based resin possessing the dithiocarbamate moiety (DTC-chitosan resin) was synthesized using cross-linked chitosan as a base material. The adsorption behavior of trace metal ions on the DTC-chitosan resin was systematically examined by packing it in a mini-column (1 ml of the resin) and measuring the recovery by ICP-MS. The resin could adsorb almost 100% of 7 kinds of metals(Cu, Mo, Ag, Te, W, Hg and Bi) at pH ranges from acidic to neutral. However, elution of these metals from the resin was difficult. In this study, we improved the recovery efficiency by a pretreatment of the resin: the resin was added to 100 ml of a 0.1 M copper sulfate solution, stirred for 24 h and washed sufficiently with 1 M nitric acid and water. With this pretreatment, metals adsorbed on 1 ml of the resin were readily eluted with 1 M nitric acid (10 ml). This method was applied to the determination of metals in river-water samples; the RSDs (10-fold preconcentration) were within 5%.
View full abstract
-
Takayuki WAKUI, Hisanori IMURA, Kousaburo OHASHI
Article type: Notes
2003 Volume 52 Issue 9 Pages
825-828
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The solid-phase extraction and concentration of mono-, di-, and tri-chlorophenols (CPs) were studied using trioctylphosphine oxide (TOPO)- and trioctylmethylammonium chloride (TOMAC)-impregnated membrane disks (Empore
TM). The solid-phase extraction of CPs at a pH lower than 7 was markedly enhanced with TOPO, and became almost quantitative. This extraction enhancement is ascribed to hydrogen bonding between TOPO and CPs in the solid phase. The extraction of CPs under the basic conditions was markedly enhanced with TOMAC. A quantitative recovery of CPs at pH 2.9∼10.3 was achieved using both TOPO and TOMAC-impregnated membrane disks. To determine CPs by HPLC, they were eluted by acetonitrile containing NH
3, evaporated to dryness in the presence of LiOH, and dissolved in a small volume of acetic acid. Trace CPs at 0.1 μg l
−1 levels were readily concentrated by a factor of 500 and quantitatively recovered.
View full abstract
-
Keisuke MORITA, Junichi ISOE, Emiko KANEKO
Article type: Notes
2003 Volume 52 Issue 9 Pages
829-831
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The measurement of sulfate ion is important in environmental and industrial fields. However, a field-analytical method which can be implemented in field testing and performed at the site is still lacking. Therefore, the development of a sensitive, yet simple technique is needed for the field determination of sulfate ion. In this study, a simple visual method has been established for the determination of sulfate ion at ppm levels using a black membrane filter. Our method consists of two steps: barium chloride is added to a water sample to form barium sulfate, and the mixture containing the white precipitate is filtrated through a black membrane filter using a 10 ml syringe. We found that the precipitate is effectively concentrated in a distinct pattern on the membrane filter, which is a tracing of the reverse side of the support screen. Sulfate ion as low as 2 ppm concentrations can be visually detected when a 10 ml sample is used. The method reported here will be useful as a simple and rapid field test, which has long been in great demand.
View full abstract
-
Fusa MATSUZAKI, Jinghua ZHANG, Yuji TAKAO, Takashi SHIMOMACHI, Sunao Y ...
Article type: Notes
2003 Volume 52 Issue 9 Pages
833-837
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The acclimation of a plant to a constantly changing environment involves the accumulation of certain organic compounds of low molecular mass, known collectively as compatible solutes, in the cytoplasm. Evidence from numerous investigations of plants strongly suggests that glycine betaine (GB), an amphoteric quaternary amine, plays an important role as a compatible solute under various types of environmental stress, such as high levels of salts and low temperature. In this work, sugar beet (
Beta vulgaris) was grown at NaCl concentrations of up to 300 mmol/l soil, and the effects of salt on the growth, contents of water, chlorophyll, soluble protein, soluble saccharide and GB in leaf were measured. The addition of NaCl up to 300 mmol/l soil significantly affected the growth, and the contents of water and chlorophyll decreased, whereas the soluble protein and saccharide concentrations in the leaf changed little. On the other hand, the GB concentration increased 6-fold with increasing the salinity of the medium, suggesting that GB is a main osmoprotectant in this plant. The induction of GB was monitored by cultivating the plant seed under salt stress. It was found that the GB originally contained in the seed was lost during the early stage of cultivation, and new GB was synthesized in the stage of germination in a dose-dependent fashion with respect to the salt concentration.
View full abstract
-
Haruyoshi NAKAGAWA, Naoki HIRAYAMA, Takaharu HONJO
Article type: Notes
2003 Volume 52 Issue 9 Pages
839-842
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The effect of a counterion was investigated in the solvent extraction of alkali metal ions using crown ether. Nitrobenzene was used as the solvent, 18-crown-6 was used as the extracting reagent, rubidium ion, which suits the cavity size of 18-crown-6, was selected as the model of alkali metal ions. In order to vary the distribution of the electric charge and the hydrophobicity of the counterion, various substituted phenols were used as the counterion. The maximum extraction ratio of rubidium ion was increased with non-localization of the distribution of the electric charge and with its hydrophobicity higher. The maximum extraction ratio was increased by introducing chloro substituent to the counterion, but it was not more effective than introducing nitro substituent. The pH where the extraction curve rose depended upon the p
Ka of the counterion. In this extraction system, the value of the pH controlled only the condition of the dissociation of the counterion.
View full abstract
-
Noriko WADA, Jinghua ZHANG, Nobutaka JINNO, Akira OKUBO, Sunao YAMAZAK ...
Article type: Notes
2003 Volume 52 Issue 9 Pages
843-846
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The adaptation of a halophyte,
Suaeda japonica, in a saline environment was surveyed by analysing the cellular components, such as the major inorganic and organic constituents, as well as glycine betaine between halophytic and non-halophytic plants grown along the seashore of Ariake Sea. In contrast to non-halophytes, a remarkable accumulation of salt in leaf cells of halophytes,
Suaeda and
Artemisia, was accompanied by the accumulation of a compatible solute, glycine betaine. In a culture experiment under saline conditions, glycine betaine looked to be most effectively induced in the concentration of salt of around 250 mM NaCl.
View full abstract
-
Satoko TADAUMI, Shinobu ENDO, Hiroto AKAGAWA, Yutaka ITABASHI
Article type: Notes
2003 Volume 52 Issue 9 Pages
847-850
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
An analysis of the long-chain fatty acids in some saponified vegetable oils (olive, rice bran and linseed oils) and salmon roe phospholipids was carried out using capillary zone electrophoresis (CE) with indirect UV detection at 254 nm. Adenosine monophosphate (AMP) was used as an indirect UV detection reagent. The electrolyte consisted of 40 mM Tris buffer and 2.5 mM AMP in
N-methylformamide/dioxane/water (5 : 4 : 1, v/v/v, for vegetable oil fatty acids; 4 : 6 : 1 for fish oil fatty acids). A satisfactory separation of an approximately 20 fmol mixture of palmitic (16 : 0), stearic (18 : 0), oleic (18 : 1n-9), linoleic (18 : 2n-6) and linolenic (18 : 3n-3) acids from vegetable oils was achieved within 25 min. Icosapentaenoic acid (20 : 5n-3) and docosahexaenoic acid (22 : 6n-3) were also completely resolved within 50 min, although some peak overlappings were observed in the fish sample. The fatty acid compositions (mol%) obtained by CE were in good agreement with those determined by HPLC. Thus, the CE method employed in this study would be useful for determining the composition of saturated and unsaturated fatty acids from biological samples.
View full abstract
-
Toshio SHINOHARA, Hirokazu MATSUBARA, Nobutaka YOSHIKUNI, Koichi OGUMA
Article type: Notes
2003 Volume 52 Issue 9 Pages
851-853
Published: 2003
Released on J-STAGE: January 30, 2004
JOURNAL
FREE ACCESS
The determination of boron in steel was carried out by ICP-AES combined with anion-exchange separation. About 0.2 g of a steel sample was weighed in a quartz beaker and dissolved with a mixture of 2 cm
3 of nitric acid, 1.5 cm
3 of phosphoric acid and 4 cm
3 of water by heating on a hot plate. Most of the nitric acid was evaporated off and the sample solution was transferred into a separatory funnel with 10 cm
3 of 0.1 mol dm
−3 nitric acid and water. About 3 g of iron(III) hydroxide oxide was dissolved in a mixture of 10 cm
3 of hydrofluoric acid, 1 cm
3 of 30% hydrogen peroxide and 50 cm
3 of water by heating on a hot plate and added to the above sample solution. The sample solution was diluted to about 100 cm
3 with water, allowed to stand for 1 h and then loaded onto an anion-exchange resin Bio-Rad AG1 column preconditioned by a fluoride solution. The iron in the sample solution passed through the column, while the boron was adsorbed as BF
4− on the column and recovered with 6.5 mol dm
−3 nitric acid. The effluent, containing boron, was treated with phosphoric, perchloric and nitric acids and diluted to 25 cm
3 with water to be subjected to ICP-AES at 249.77 nm. The proposed method was successfully applied to the determination of boron in a steel-certified reference material, JSS 174-5, provided by the Japan Iron and Steel Federation. The detection limit was found to be 1.3 μg g
−1 boron in steel.
View full abstract