塑性と加工
Online ISSN : 1882-0166
Print ISSN : 0038-1586
ISSN-L : 0038-1586
論文
突起付きパンチを用いた張力下の打抜きによる高強度薄鋼板の打抜き穴広げ性の改善
高橋 雄三堀岡 聡河野 治小原 昌弘潮田 浩作
著者情報
ジャーナル フリー

2012 年 53 巻 617 号 p. 569-573

詳細
抄録

To meet the requirements for the weight reduction of automobiles, high-tensile-strength steel sheets have been applied extensively to the manufacture of auto parts. But their relatively lower press formability has obstructed their further application, and it is strongly demanded that the stretch flange ability of such steel sheets be increased, and cracks that occur when stretching edges during the press forming of such steel sheets be suppressed. Thus the authors have carried out a study to improve the stretch flange ability of high-tensile-strength steel sheets by optimizing the punching method and obtained the following conclusions. Work hardening on a pierced edge is mainly caused by deformation by the punch motion while shearing the material. By attaching a hump of certain shape at the bottom of the punch, the ductile fracture in the material caused by the punch corner is accelerated by the hump′s effect to increase stress triaxiality, which reduces the extent of total deformation through shearing, thereby improving the stretch flange ability of the material.

著者関連情報
© 2012 一般社団法人 日本塑性加工学会
前の記事 次の記事
feedback
Top