Microcapsules of a water-in-oil-in-water (W/O/W) emulsion, which contained a hydrophilic substance, 1,3,6,8-pyrenetetrasulfonic acid tetrasodium salt (PTSA), in its inner aqueous phase, was prepared by hot-air-drying or freeze-drying the emulsion using a single-droplet-drying method. Pullulan, maltodextrin, or gum arabic was used as a wall material, and the oily phase was tricaprylin, oleic acid, olive oil, or a mixture of tricaprylin and olive oil. An encapsulation efficiency higher than 0.95 was reached except for the microcapsules prepared using gum arabic and oleic acid. The hot-air-dried microcapsules were generally more stable than the freeze-dried microcapsules at 37°C and various relative humidities. The stability was higher for the microcapsules with tricaprylin as the oily phase than for the microcapsules with oleic acid. The higher stability of the microcapsules with tricaprylin would be ascribed to the lower partition coefficient of PTSA to the oily phase. There was a tendency for the stability to be higher at lower relative humidity for both the hot-air- and freeze-dried microcapsules. The volumetric fraction of olive oil in its mixture with tricaprylin did not significantly affect either the encapsulation efficiency or the stability of the hot-air-dried microcapsules.

This article cannot obtain the latest cited-by information.