Adsorption Performance on As(III) from Aqueous Solution Using the Complex Nickel–Aluminum Hydroxides

抄録

In this study, complex nickel–aluminum hydroxides were prepared at different molar ratios (NA12, NA11, NA21, NA31, and NA41), and their adsorption capability on arsenic ions (As(III)) from aqueous media was assessed. The physicochemical properties such as morphology, X-ray diffraction pattern, specific surface area, numbers of hydroxyl groups, and surface pH were investigated. In addition, the effect of contact time, temperature, and pH on the adsorption capability on As(III) was also evaluated. NA41 exerted the highest adsorption capability on As(III) comparable to other prepared adsorbents. However, the specific surface area and numbers of hydroxyl groups did not significantly affect the adsorption capability on As(III). The equilibrium adsorption of As(III) using NA41 was achieved within 24 h, and the obtained results corresponded to a pseudo-second-order model with correlation coefficient value of 0.980. Additionally, the adsorption isotherms were well described by both the Langmuir and Freundlich equations. The optimal pH condition for removal of As(III) using NA41 was found to be approximately 6–8. Finally, the adsorption mechanism of As(III) was assessed by analyzing the binding energy and elemental distribution, which indicated that the electrostatic interaction and ion exchange influenced the adsorption of As(III) under experimental conditions. These results demonstrated the potential candidate of NA41 as an effective adsorbent on As(III) removal from aqueous media.