Electrochemistry
Online ISSN : 2186-2451
Print ISSN : 1344-3542
ISSN-L : 1344-3542
Articles
Key Technology of the Electrochemical Machining Flow Field in Aero-rotor Blades Made of Inconel®718
Liang HUANGYan CAOChunlei TIANRuochen ZHAOJiang DUYuanfei WANG
著者情報
ジャーナル オープンアクセス
電子付録

2021 年 89 巻 3 号 p. 279-289

詳細
抄録

To address the problems of serious tool loss and the easy deformation of aero-rotor blade profiles in NC milling technology, electrochemical machining can realize the processing of complex, specially structured products with advanced materials such as nickel alloy Inconel®718 by means of a non-contact electrochemical etching process. In this paper, by analysing the electrochemical reaction state of Inconel®718 alloy in vertical electrolytic processing, the electrolyte side flow of aero-blade electrochemical machining technology is innovatively transplanted to the traditional vertical single-axis feed machining tool, and the corresponding optimized flow channel structure that combines the characteristics of positive flow mode and side flow mode are proposed. Then, the verification test shows that the vertical machining of aero-blade with the characteristics of positive flow and side flow of electrolyte has high machining quality, and its surface error is in the range of 0.02–0.12 mm (the average surface error can reach 0.07 mm), the corresponding surface roughness is 1.16 µm. Therefore, the research foundation and technical potential are laid for the vertical electrochemical machining of the aero-rotor blades.

Fullsize Image
著者関連情報
© The Author(s) 2021. Published by ECSJ.

This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium provided the original work is properly cited. [DOI: 10.5796/electrochemistry.21-00025].
http://creativecommons.org/licenses/by/4.0/
前の記事 次の記事
feedback
Top