Abstract
To reduce costs of inverters, a current detection method using a single shunt resistor is required for motor drive systems in home electrical appliances. In this paper, a method is proposed to correct a voltage reference vector by converting coordinates from a rotating reference frame into a fixed reference frame. Also proposed is a new coordinate transformation method that is appropriate for the correction.
Authors focused on the undetectable area that exists every 60 degrees in α-β coordinates. When the α-β coordinates in an nπ/3 rotation are defined as αn-βn, the αn-axis can be defined as the central axis in an undetectable area. We propose a coordinate transformation method that converts the voltage vector in the d-q coordinates into uvw phase voltages through αn-βn coordinates then correct it. This method corrects the voltage vector by a very simple algorithm that limits the αn-βn elements.
The effectiveness of the proposed method is confirmed by simulation and experiment. Currents were clearly detected by using the proposed method. This shows that the proposed method is suitable for position sensor-less drives in permanent magnet synchronous motors.
