The quality of electric power caused by frequency fluctuation and voltage rise will be degraded because of the lightning surge and the mass introduction of distributed power. Thus, it is necessary to improve the peformance of gas circuit breaker in order to maintain the stable supply of electric power. It has been reported that the arc conductance is calculated as the index of the current interruption in numerical analysis. However, few report have the measured value in the current interruption. This is because that the current interruption is the steep phenomenon of micro seconds range. Thus, it is necessary to establish the time-high precision and non-contact measurement method. In this paper, the arc temperature is measured near current zero using the microsecond spectroscopic measurement. As a result, the microsecond spectroscopic measurement which combines the conventional spectroscope and the high speed video camera is 200 times faster than the measurement of conventional spectroscope. For this reason, the microsecond spectroscopic measurement is possible with the high speed video camera. Therefore, it is possible to measure the arc temperature with decreasing the current using the microsecond spectroscope.
J-STAGEがリニューアルされました！https://www.jstage.jst.go.jp/browse/-char/ja/
