ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Regular Article
Modeling of Microstructure Evolution during Hot Strip Rolling of Dual Phase Steels
Dongsheng LiuFateh FazeliMatthias Militzer
Author information

2007 Volume 47 Issue 12 Pages 1789-1798


Microstructure models for hot strip rolling of CMnSi and CMnMo dual-phase steels have been proposed. The constitutive behaviour of austenite prior to the onset of dynamic recrystallization has been described by the physically based Kocks–Mecking model. The static recrystallization kinetics has been simulated by the Johnson–Mehl–Avrami–Kolmogorov (JMAK) theory. The recrystallized austenite grain size is described using an empirical equation considering the effect of strain, prior austenite grain size and deformation temperature. Ferrite transformation start is modeled with an approach that considers early growth of corner nucleated ferrite. The fraction of ferrite transformed from austenite during continuous and/or stepped cooling is described using the JMAK approach in combination with the additivity rule. The ferrite grain size is quantified as a function of the transformation start temperature. The critical conditions for the onset of bainite and martensite transformations in the remaining austenite have been empirically evaluated as a function of ferrite fraction transformed. The microstructure models for these metallurgical phenomena have been validated with experimental studies in the laboratory emphasizing industrially relevant hot strip rolling conditions and run-out table cooling strategies.

Information related to the author
© 2007 by The Iron and Steel Institute of Japan
Previous article Next article