ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Regular Article
Mill Scale for Synthesis of Fe–Ni and Fe–Ni–Co Alloys through Gaseous Reduction: Reaction Kinetics and Mechanism
M. BahgatMin-Kyu PaekJong-Jin Pak
Author information

2008 Volume 48 Issue 11 Pages 1493-1499


Nickel and Nickel cobalt ferrite powders were prepared through the ceramic route by calcination of a stoichiometric mixture of nickel oxide, cobalt oxide and mill scale as source for iron oxide. The produced ferrites powders were isothermally reduced in pure hydrogen at 800–1100°C. Based on thermogravimetric analysis, the reduction behavior of the synthesized ferrite and the kinetics reaction mechanism were studied. The initial ferrite powder and the various reduction products were characterized by XRD, SEM and reflected light microscope to reveal the effect of hydrogen reduction on composition, microstructure and reaction kinetics of synthesized ferro-alloys. The activation energy values were calculated from Arrhenius equation. The approved mathematical formulations for the gas solid reaction were applied to confirm the estimated rate controlling reaction mechanism. Complete reduction of home made ferrite powder was achieved with synthesize of nanocrystalline Fe–Ni and Fe–Ni–Co alloys.

Information related to the author
© 2008 by The Iron and Steel Institute of Japan
Previous article Next article