Progress in the Development and Use of Grain Refiner Based on Cerium Sulfide or Titanium Compound for Carbon Steel

抄録

A fine-grained microstructure yields the optimum combination of strength and toughness of steel. Moreover refinement of the as-cast structure can reduce the tendency for hot-cracking during forging and rolling. This paper describes how small inclusions can be used to control the microstructure of steels. These small inclusions (dispersoids) are oxides, sulfides, nitrides and carbides which are in the 1 μm size range and capable of promoting grain refinement during solidification by a process of epitaxial nucleation or in the solid state through intragranular nucleation of ferrite. Such particles are sufficiently small to be harmless from a toughness point of view, but at the same time large enough to act as potent nucleation sites during phase transformation. The dispersoids can either be created by balanced additions of strong oxide and sulfide forming elements to an impure steel melt or be added directly into the liquid steel through a specially designed master alloy containing the nucleating particles. In both cases it is possible to manipulate the steel microstructure in a positive direction, but the latter method, involving the use of a master alloy, has probably a wider industrial application.