ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Regular Article
Experimental Modeling of the Continuous Casting Process of Steel Using Low Melting Point Metal Alloys—the LIMMCAST Program
Klaus TimmelSven EckertGunter GerbethFrank StefaniThomas Wondrak
Author information

2010 Volume 50 Issue 8 Pages 1134-1141


This paper presents the new experimental facility LIMMCAST which was designed for modeling fluid flow and transport processes in the continuous casting of steel. The facility operates at temperatures of 200–400°C by using the low melting point alloy SnBi. The main parameters of the facility, including the dimensions of the test sections, will be given. The resultant possibilities with respect to flow investigations in the tundish, in the submerged entry nozzle, and in the mould will be discussed. Over the period of assembling and commissioning the LIMMCAST facility, the small-scale set-up Mini-LIMMCAST was employed which uses the alloy GaInSn that is liquid at room temperatures. At this precursory facility an experimental program was started which is focused on quantitative flow measurements in the mould and in the submerged entry nozzle (SEN). The Ultrasound Doppler Velocimetry (UDV) and the Contactless Inductive Flow Tomography (CIFT) were applied to determine the flow structure within the mould. First experimental results will be presented here for a single and a two-phase flow in which argon gas bubbles were injected at the inlet of the SEN. According to the concept of the electromagnetic brake the impact of a DC magnetic field on the emergent jet flow from the SEN has been studied.

Information related to the author
© 2010 by The Iron and Steel Institute of Japan
Previous article Next article