ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Amenability of Reduced Iron Ore Pellets to Mechanical Degradation
Fernando Oliveira BoechatLeonardo Tomas da RochaRodrigo Magalhães de CarvalhoSung-Mo JungLuís Marcelo Tavares
Author information

2018 Volume 58 Issue 6 Pages 1028-1033


The mechanical properties of iron ore pellets are of central importance to guarantee good productivity in direct reduction plants. Besides the generation of fines during handling, mechanical degradation resulting from forces produced inside the furnace are detrimental to the performance of these reactors, since they can lead to the generation of clusters, and also because they impact negatively the permeability of the charge to the flow of reducing gases. The present work analyzed the effect of different degrees of reduction on the mechanical properties of direct reduction iron ore pellets so as to estimate the proportion of fines generated inside a direct reduction furnace. As such, tests have been performed with unreduced, as well as iron ore pellets that were subjected to different degrees of reduction, with the aim of analyzing their mechanical properties, including microhardness, cold compression strength, mass loss in drop tests as well as pore size distributions. From these results, a parameter of a model of mass loss due to surface breakage was estimated, which demonstrated their greater amenability to breakage as reduction progressed. A combination of these results to simulations using the Discrete Element Method of a direct reduction furnace made it possible to estimate in 5.7% the percentage of fines generated in the furnace.

Fullsize Image
Information related to the author
© 2018 by The Iron and Steel Institute of Japan
Previous article Next article