ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Casting and Solidification
Non-Isothermal Melt Crystallization Kinetics for CaO–Al2O3–B2O3 F-Free Mould Fluxes
Qifeng ShuJeferson Leandro KlugQiangqi Li
Author information

2019 Volume 59 Issue 6 Pages 1057-1063


Efforts have been made to develop fluorine-free mould fluxes for the continuous casting of steel process. In this work the crystallization behaviour of fluorine-free mould slags based on the CaO–Al2O3–B2O3 system was investigated by differential scanning calorimeter (DSC) and scanning electron microscopy equipped with energy dispersive spectroscopy(SEM-EDS). The crystallization kinetics for Ca3Al2O6 primary crystals was analysed by combining modified Avrami analysis with Friedman isoconversional method. Avrami parameter n is close to 4 for samples with the ratios w(CaO)/w(Al2O3)=1 and w(CaO)/w(Al2O3)=1.2, indicating a crystallization mechanism of continuous bulk nucleation and 3D crystal growth. The Avrami parameter n for samples with w(CaO)/w(Al2O3)=0.9 is close to 3, indicating instantaneous bulk nucleation and 3D crystal growth. The crystallization rate constant is the highest and half crystallization time is the lowest for the samples with w(CaO)/w(Al2O3)=0.9, indicating the fastest crystallization. In the initial stage, effective activation energies were mainly determined by the undercooling values. In the final stage, kinetic barrier for crystallization could have some influence on crystallization; for the investigated mould fluxes crystallization in the final stage is retarded by increasing w(CaO)/w(Al2O3) ratio. Thus crystallization mechanisms were elucidated and effective activation energy of crystallization for the first crystal which precipitates from melt was determined.

Information related to the author
© 2019 by The Iron and Steel Institute of Japan
Previous article Next article