ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Steam Reforming of Methane on Sponge Iron: Influence of Gas Composition on Reaction Rate
Tiago Ramos RibeiroJoão Batista Ferreira NetoJoão Guilherme Rocha PoçoCyro TakanoLeiv KolbeinsenEli Ringdalen
Author information
JOURNALS OPEN ACCESS Advance online publication

Article ID: ISIJINT-2019-477

Details
Abstract

Direct Reduction processes use gases (CO and H2) for iron reduction and production of sponge iron or direct reduced iron (DRI). The generation of this gas occurs through methane reforming, which can be done in a reformer or inside the reduction shaft with the sponge iron as a catalyst. The latter occurs in the auto-reforming processes. The kinetics of steam reforming of methane catalyzed by sponge iron was studied at temperatures between 875°C and 1050°C. Results showed that sponge iron acts as a catalyst and methane conversion is increased in higher temperatures and with higher H2/H2O ratio in the inlet gas. The inlet gas composition like one of the industrial auto-reforming processes led to intense carburization and hindered the catalytic reforming reaction.

Information related to the author
© 2020 by The Iron and Steel Institute of Japan
feedback
Top