ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Influence of Slag Composition and Temperature on Slag Foaming
Shin-ya KitamuraKazuo Okohira
Author information
JOURNAL FREE ACCESS

1992 Volume 32 Issue 6 Pages 741-746

Details
Abstract

The slag foaming behavior caused by the reaction between FeO containing slag and hot metal was investigated for the CaO-SiO2-Al2O3-P2O5-TiO2-MnO-MgO-CaF2 system. The peak of slag foaming height was observed when (CaO)/(SiO2) was around 1.2 and the peak value of (CaO)/(SiO2) became slightly large with the increase in temperature and the CaF2 mixing ratio. In the high (CaO)/(SiO2) region, the slag foaming height increased with the increase in temperature and the CaF2 mixing ratio.
Under this experimental condition, the inverse proportional relationship between the slag viscosity and the slag foaming height was found but no significant influence of P2O5 was observed. In the solid and liquid coexisting region, slag foaming height increased with the increase in liquid fraction.

Content from these authors
© The Iron and Steel Institute of Japan
Previous article Next article
feedback
Top