ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Effect of Hydrogen on Toughening of a Low Alloy Steel
S. K. SinghB. Sasmal
Author information
JOURNAL FREE ACCESS

2004 Volume 44 Issue 1 Pages 203-208

Details
Abstract

A low alloy steel containing 0.10C, 0.25Si, 0.87Mn, 0.56Cr, 0.47Ni, 0.21Mo, 0.023S and 0.01P (mass%) was cold rolled to 1.6 mm thick sheets and recrystallised at 700°C to get ferrite grains of 8, 21.5 and 32.5 μm with a random distribution of some spheroidal carbide particles and a few inclusions. Tensile specimens prepared from these sheets were cathodically charged in 1 N NaOH and 0.1 N H2SO4 solutions for periods varying from 2 to 24 h, with a current density of 50 mA/cm2. Tensile tests were carried out with a cross-head velocity of 1.2 mm/min, fracture surfaces were examined by SEM and the deformed structure was examined by TEM. The increase in hydrogen content, up to certain limit, has been effective to cause an increase in both ultimate tensile stress and % elongation resulting a toughening of the steel, while the work hardening is not remarkable. Increase in the ferrite grain size has been observed to enhance this effect. The tensile behaviour has been correlated with observed fracture characteristics and dislocation sub-structure in the ferrite matrix. The toughening effect has been explained in the light of dislocation solute interactions and the damage caused by hydrogen.

Content from these authors
© The Iron and Steel Institute of Japan
Previous article Next article
feedback
Top