Name : [in Japanese]
Location : [in Japanese]
Date : January 19, 2022 - January 20, 2022
Pages 71-72
In this study, we investigated the adhesion of cedar powder burning ash to the metal surface and the melting behavior of cedar ash. For adhesion to the metal surface, a flat flame with an equivalent ratio of 0.7 was used, and the metal was burned for 70 minutes with the filling amount as a parameter. As for the melting behavior, the samples were raw cedar and cedar ash, and the temperature was raised from room temperature to 1400°C at a heating rate of 10°C / min using heating combustion with a heater. As a result, the amount of adhesion on the metal surface was positively dependent on the amount of cedar powder filled. As for the melting behavior, raw melted completely at a higher temperature.
