研究論文
Al–Mg合金およびAl–Si合金におけるAE法を用いた凝固割れ発生の判断基準
2012 年 62 巻 3 号 p. 104-108
詳細
2012 年 62 巻 3 号 p. 104-108
Detection of solidification cracking of JIS AC7A aluminum alloy and Al–7%Si alloy was attempted by using acoustic emission method. In order to detect AE of solidification cracking, we investigated about AE signals of gas porosity, shrinkage cavity, and fracture in the semi-solid tensile test. The frequency bands of these casting defects were 150 kHz or less, so the source characterization of AE signals were difficult by that. Therefore we discussed and suggested value of integrated AE peak volt as an indicator of crack initiation. As a result, we proved value of time integral (IAP) is beneficial for eutectic alloy and value of temperature integral (TIAP) is beneficial for noneutectic alloy. We also suggested value of time temperature integral (DIAP) as the criterion of crack initiation which is beneficial for eutectic and non-eutectic alloy.
