造船協會論文集
Online ISSN : 1884-2062
ISSN-L : 0514-8499
クラック アレスターの有効性について (第1報)
木原 博金沢 武池田 一夫前中 浩木下 勝永元 隆一矢島 浩
著者情報
ジャーナル フリー

1967 年 1967 巻 122 号 p. 191-199

詳細
抄録

The crack arrester is used for prevention of welded steel structures from brittle fracture. In the latest mammoth tankers, the welded crack arrester of high quality steel such as grade E steel is used instead of the riveted seam.
In this paper, the brittle crack arresting characteristics for welded crack arrester was investigated by using large size specimens in 1, 300 mm width. Then the correlation between the characteristics in large size specimen and in standard ESSO test with temperature gradient as a substitute of double tension test was examined.
From the test results, it was found that the modified gross stress-arresting temperature curves for arrested crack length of 500, 750 and 1, 000 mm, respectively, were common, and the effective crack length was approximately 250 mm which was obtained from the ESSO test or the double tension test with temperature gradient.
In addition, the effect of width of arrester plate on the crack arrest in which the distribution of residual stress was taken into account, was found.

著者関連情報
© 日本船舶海洋工学会
前の記事 次の記事
feedback
Top