J-STAGE トップ  >  資料トップ  > 書誌事項

精密工学会誌
Vol. 76 (2010) No. 11 P 1261-1265

記事言語:

http://doi.org/10.2493/jjspe.76.1261

論文

This paper describes the etching effects of Na2SO4 electrolyzed oxidizing water on the surface of pure iron. First, we threw light on the etching characteristic of electrolyzed oxidizing water on the surface of pure iron by comparative immersion experiments with H2SO4 solution. The results show that etching effects of electrolyzed oxidizing water are huge. In addition, the higher the ORP/pH value of the electrolyzed oxidizing water becomes, the quicker the etching effects works. Next, we threw light on the influence of electrolyzed oxidizing water on the surface shape of pure iron, by the observation using the SEM image. The results indicated that electrolyzed oxidizing water did not have a big influence on the surface shape of pure iron. Lastly, by analyzing the surface, we made it clear that electrolyzed oxidizing water had no bad influence on the chemical composition of the pure iron surface. The study indicates that Na2SO4 electrolyzed oxidizing water can be applied to the surface treatment and washing of pure iron. Na2SO4 electrolyzed oxidizing water does not have chloride ion, unlike NaCl electrolyzed oxidizing water. Therefore, Na2SO4 electrolyzed oxidizing water is wide in the application scope, compared with NaCl electrolyzed oxidizing water.

Copyright © 2010 公益社団法人 精密工学会

記事ツール

この記事を共有