粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
ガスアトマイズ法によるBi-Sr-Ca-Cu酸化物粉末の製造とその熱処理特性
皆川 和己奥山 秀男原田 幸明
著者情報
ジャーナル オープンアクセス

1991 年 38 巻 2 号 p. 308-311

詳細
抄録
Rapidly solidified Bi-Sr-Ca-Cu-O (2:2:2:3) glassy ceramics was produced by gas atomization. Spherical powder less than 20μm was obtained more than 50%, and 1/3 of product was coiposed of thin fibers, which had one or two heads of round particles or had several knots. Both of powder and fiber were amorphous, the crystallization temperature was about 500°C. The 3.0nm phase appeared above 800°C, and formed plate like crystals gathering to be aggregates equivalent to primary particles. Liquid phase broke out above 860°C, and 2.4nm phase remained without forming 3.7nm phase.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事
feedback
Top