Journal of the Japan Society of Powder and Powder Metallurgy
Online ISSN : 1880-9014
Print ISSN : 0532-8799
Preparation of Thin Film LSGM using the Sol-gel Method
Toru HataeYohtaro Yamazaki
Author information
JOURNALS FREE ACCESS

Volume 50 (2003) Issue 12 Pages 1079-1083

Details
Download PDF (3843K) Contact us
Abstract

Preparation of the thin film La0.9Sr0.1Ga0.8Mg0.2O3-δ (LSGM) on a porous La0.7Sr0.3MnO3 (LSM) substrate using the sol-gel method was investigated. At first, a stable precursor solution was prepared. Then the thin films were prepared from the solution by spin coating on a porous LSM substrate filled with ethylene glycol. The phase of the obtained films was confirmed by X-ray diffraction. Main phase of the films was LSGM and a small amount of impurity phases was detected. The thickness of the prepared films was about 2μm, which is measured by Scanning Ion Microscopy (SIM). The good adherence of the thin films to the porous substrate was observed.

Information related to the author
© Japan Society of Powder and Powder Metallurgy
Previous article Next article

Recently visited articles
feedback
Top