Journal of MMIJ
Online ISSN : 1884-0450
Print ISSN : 1881-6118
ISSN-L : 1881-6118
論文
粒界き裂に基づく単一鉱物多結晶岩石の一軸引張破壊解析
松木 浩二狩野 祐一坂口 清敏木崎 彰久
著者情報
ジャーナル フリー

2010 年 126 巻 12 号 p. 668-678

詳細
抄録

Using joint elements for a mechanical model of grain boundaries, we performed a preliminary 3D finite element analysis of uniaxial tensile fracture for specimen models of monomineral polycrystalline rock under the assumption that fracturing occurs only at the grain boundaries. The specimen models were created on a computer by the method previously proposed by the authors, and the constitutive law of the grain boundaries was derived by applying the associated flow rule in the plastic theory and a tension-shear-softening curve to an extended Coulomb criterion. Tensile fracturing initiates at grain boundaries with a small angle of the normal direction relative to the loading axis, which are followed by grain boundaries with a larger angle of the normal direction. Unloading of intergranular cracks occurs before the peak strength when the intergranular cracks do not compose the final failure plane that is completely formed near the inflection point of the axial stress-axial strain curve after the peak. During the completion of the final failure plane, the conversion of failure mode from tension to shear occurs at intergranular cracks that have a large angle of the normal direction relative to the loading axis. For these intergranular cracks, the axial displacement given at an end of the specimen is converted to a shear displacement, rather than an opening displacement, and the normal stress becomes to be compressive due to shear dilation. Furthermore, the number of tensile intergranular fracturing at the peak strength increases with a decrease in the constant α that characterizes the rate of decrease in the tensile strength in the tension-shear-softening curve of the grain boundaries, and as a result, the tensile strength of the rock specimen increases with a decrease in the constant α. However, the effect of the residual frictional coefficient is small and limited to the stage after the final failure plane is completely formed, since the residual friction coefficient affects the mechanical behavior of the grain boundaries only after the failure plane is completely formed.

著者関連情報
© 2010 The Mining and Materials Processing Institute of Japan
前の記事 次の記事
feedback
Top