日本ロボット学会誌
Online ISSN : 1884-7145
Print ISSN : 0289-1824
ISSN-L : 0289-1824
スプライン曲線による車輪型移動ロボットの軌道制御
小森谷 清谷江 和雄
著者情報
ジャーナル フリー

1990 年 8 巻 2 号 p. 133-143

詳細
抄録

Path design is one of the bases of autonomous control of mobile robots. Smoothness is necessary for the path from the viewpoint of dynamic robot motion. Direction of the robot on the path is important from the viewpoint of its interaction with its environment. So not only points through which the path goes, but also a tangent at each point are preferable for specifyng the path in a space because most of wheel-type mobile mechanisms cannot control their direction independently from their position on the path.
In order to satisfy these conditions a path design using B-spline curves is presented. which has a continuous 2 nd derivative, that is, a continuous curvature, and which passes through given points with a tangent specified at each point. To control a mobile robot to move along the designed curve an algorithm is presented, which decides speed pattern for a two-wheel-driven-type mobile mechanism with a minimum travel time. Feasibility of using the designed spline curve for trajectory control is demonstrated using an experimental hardware robot with two wheels driven independently.

著者関連情報
© 社団法人 日本ロボット学会
次の記事
feedback
Top