電気加工学会誌
Online ISSN : 1881-0888
Print ISSN : 0387-754X
ISSN-L : 0387-754X
研究
電解加工を用いた一括表面テクスチャリングにおけるテクスチャの微細化
小谷野 智広高橋 克成細川 晃古本 達明橋本 洋平
著者情報
ジャーナル フリー

2022 年 56 巻 141 号 p. 52-

詳細
抄録

A new tool electrode for surface texturing by electrochemical machining is developed to minimize the size of the texture pattern. The processing parts and the electrolyte supply parts are made of thin plates, and they are laminated and assembled to make a tool electrode for texturing of parallel grooves. A micro-texture pattern of the tool electrode is simultaneously replicated on the workpiece by electrochemical machining. Experimental results show that by reducing the width of the electrolyte supply part, the pitch of the texture pattern can be reduced, although the groove width does not change. This tendency is in agreement with the analytical results. In addition, by reducing the width of the processing part, the groove width of the machined surface can be reduced. As a result, a micro-texture pattern of parallel grooves with a width and pitch less than 100 μm can be fabricated. In consecutive fabrications of the texture pattern with the same electrode, by setting the electrolyte flow rate to the optimum value, the number of times of successful machining can be increased.

著者関連情報
© 2022 一般社団法人 電気加工学会
feedback
Top