Published: June 15, 1976Received: -Available on J-STAGE: June 03, 2009Accepted: May 18, 1976
Advance online publication: -
Revised: -
Correction information
Date of correction: June 03, 2009Reason for correction: -Correction: TITLEDetails: Wrong : LECTURE Right : Composite Materials (VII)
Date of correction: June 03, 2009Reason for correction: -Correction: SUBTITLEDetails: Right : Deformation and Fracture under High Strain Rate Condition and Impact Strength
Date of correction: June 03, 2009Reason for correction: -Correction: AUTHORDetails: Right : T. Fujii1)
Date of correction: June 03, 2009Reason for correction: -Correction: AFFILIATIONDetails: [in Japanese]
Date of correction: June 03, 2009Reason for correction: -Correction: CITATIONDetails: Right : 1) Fujii, T., and M. Miki, Proc. 31st Annual Technical Conf., Reinforced Plastics/Composites Institute, SPI, sec. 21-D (1976). 5) Barker, L. M., J. Composite Materials, 5, 140 (1971). 6) Malvern, L. E., J. Appl. Mech., 73, 203 (1951). 8) Chou, P. C., and A. S. D. Wang, J. Composite Materials, 4, 444 (1970). 10) Broutman, L. J., and A. Rotem, 28th Annual Technical Conf., Reinforced Plastics/Composites Institute, SPI, sec. 17-B (1973). 11) Shewmon, P. G., and V. F. Zackay, “Response of Metals to High Velocity Deformation”, p. 97 (1961) AIMM and PE Inc., Interscience Publishers. Inc., New York 16) Chamis, C. C., M. P. Hanson, and T. T. Serafini, “Composite Materials, Testing and Design (2nd Conf.) ASTM, STP-497”, p. 324 (1972). 17) Titow, W. V., and B. J. Lanham, “Reinforced Thermoplastics”, p. 159 (1975) Applied Science Publishers Ltd,, England 18) Lynch, C. T., and J. P. Kershaw, “Metal Matrix Composites”, Chapter 10, p. 105 (1972) CRC Press, Cleveland 19) Beaumont, P. W. R., P. G. Riewald, and C. Zweben, “Foreign Object Impact Damage to Composites, STP-568”, p. 134 (1973) ASTM, Philadelphia 20) Harris, B., and A. R. Bunsell, Composites, 6, 197 (1975). 21) Novak, R. C., and M. A. DeCrescente, “Composite Materials, Testing and Design (2nd Conf.) ASTM, STP-497”, p. 311 (1972). 22) Butcher, B. R., Composites, 7, 12 (1976). 23) Rotem, A., and J. M. Lifshitz, Proc. 26th Annual Tech. Conf., Society of the Plastic Industry, 10-G (1971). 24) McAbee, E., and M. Chmura. Proc. 21st Annual Tech. Conf., Society of Plastic Engineer, Vol. XI, VII-1 (1965).