材料
Online ISSN : 1880-7488
Print ISSN : 0514-5163
ISSN-L : 0514-5163
ステンレス繊維を充てんした複合導電性樹脂の連続混練とその評価
寺下 敬次郎三井 宗洋柳 必兆宮南 啓
著者情報
ジャーナル フリー

1989 年 38 巻 435 号 p. 1452-1457

詳細
抄録

With ABS resin as matrix material and stainless steel fibers as conductive filler, the continuous kneading of composite conductive plastics was performed by changing operation conditions, such as the filling ratio of fillers, the feeding rate of raw materials, the revolution speed of paddles and the kneading temperature. The electric conductivity and shielding effectiveness of the material kneaded and the dispersion state of fillers were investigated.
It was found that the composite conductive plastics being useful as an EMI shield material for electronic instruments were obtained with the filling ratio above 10 wt%, and the electric conductivity and shielding effectiveness could be improved by kneading under a proper operation condition, i.e. an optimum feeding rate, lower revolution speed and higher kneading temperature.
Also, it was clarified that under such an operation condition the dispersion state of fillers in the matrix resin were dispersed effectively, forming a network of conductive paths and reducing breakage of fillers during kneading.

著者関連情報
© 日本材料学会
前の記事 次の記事
feedback
Top