材料
Online ISSN : 1880-7488
Print ISSN : 0514-5163
ISSN-L : 0514-5163
LFRTP成形品における開繊状態の定量的評価と力学的特性の関係
片山 傳生田中 達也三浦 義継鈴木 康之
著者情報
ジャーナル フリー

2001 年 50 巻 12 号 p. 1394-1399

詳細
抄録

The long fiber reinforced thermoplastic (LFRTP) pellet has better mechanical properties than short fiber reinforced pellet and better moldability than stampable sheet. At present, injection molding method is mainly used for molding LFRTP pellets because of its high productivity. However, the long fiber of LFRTP pellet, whose length is same as pellet length, is degraded during processing if conventional injection molding machines are used, and as the result, the mechanical properties are not improved as expected in many cases. Therefore, a new molding process is required to make good use of LFRTP pellets. Recently, a new molding process has been developed appropriate for LFRTP pellets. It is possible for this new molding machine to make fiber length longer in the molding than universal injection molding one. However, the deterioration of the filamentization becomes the disturbance of the improvement of the mechanical property. Then, the quantification of the filamentization was tried in this study. In addition to it, the experimental strength was compared with the theory strength that considers fiber length, fiber concentration and fiber orientation.
As the result, we were able to prove the effectiveness of quantification technique of the filamentization. Then, it was possible to grasp the relationship between tensile strength and filamentization, and the importance of filamentization was confirmed.

著者関連情報
© 日本材料学会
前の記事 次の記事
feedback
Top