日本口腔インプラント学会誌
Online ISSN : 2187-9117
Print ISSN : 0914-6695
ISSN-L : 0914-6695
原著
Ti-Zr合金多孔体インプラント内への骨組織侵入と骨結合力
丹羽 健年名 淳上原 亮小池 宏忠松田 俊男
著者情報
ジャーナル フリー

2006 年 19 巻 4 号 p. 439-445

詳細
抄録

On the basis of data obtained in a cell culture study on the ingrowth speed of bone formative group cells into Ti-Zr porous blocks, two kinds of implants with average pore sizes of 95 μm and 149 μm were used in this experiment. The Ti-Zr porous implants were installed in a beagleʼs upper and lower jawbones to investigate bone occupancy in the pore and bone bonding strength at 5 and 30 weeks post-implantation.
The pore size dependency on the bone occupancy and bonding strength were clearly proved by histometric investigations, statistically compared using ANOVA.5 weeks post-implantation, both pore sizes of 95 μm and 149 μm could not reach the adequate bone bonding strength of 600 N required to keep the implant fixed under functional biting. However, when the 149 μm pore size implants were immersed and cultured for 2 weeks in the medium (MEM+10% calf serum) with bone formative group cells derived from bone marrow of the host dogʼs femur before the implantation, the implants demonstrated higher bone occupancy in the pore and higher bone bonding strength of 624 N 5 weeks postimplantation compared with 360 N of the 149 μm pore size implants without pretreatment of bone formative group cells. If early loading after implantation is required, it may be effective to treat the porous implant with 14-days-cultivated bone formative cells derived from the patientʼs bone.

著者関連情報
© 2006 公益社団法人日本口腔インプラント学会
前の記事 次の記事
feedback
Top