Journal of Thermal Science and Technology
Online ISSN : 1880-5566
ISSN-L : 1880-5566
Papers
Analysis of a lithium-ion battery cooling system for electric vehicles using a phase-change material and heat pipes
Tatsuya YAMADATakafumi KOSHIYAMAManabu YOSHIKAWATakashi YAMADANaoki ONO
Author information
JOURNAL FREE ACCESS

2017 Volume 12 Issue 1 Pages JTST0011

Details
Abstract

The energy and power densities of lithium-ion batteries (LiBs) are bound to improve in the future. To use such high-performance battery systems as the power source of electric vehicles, the safety and the stability of these systems need to be guaranteed and abnormal heat emissions should not lead to thermal runaway. In this study, we have developed a prototype hybrid cooling system combined with a phase-change material and heat pipes to control abnormal heat emissions in LiBs. The system was built using paraffin wax as the phase change material, heat pipes, and an electric heater modeled on A4-sized laminated-type LiBs pack. We conducted some experiments using this system under conditions that would result in abnormal heating and thermal runaway. As a result, we were able to confirm that the time needed to reach temperatures leading to thermal runaway in the modeled battery pack was extended to 708 seconds by adopting our proposed cooling system, from 104 seconds in the case with no cooling device. A numerical analysis of the heat balance and thermal distribution was also calculated. The calculation results confirmed the thermal behavior in the experimental system, and we investigated the effect of the heat pipes and PCM. The issues that need to be solved to make practical use of the cooling system were also clarified by those discussions.

Content from these authors
© 2017 by The Japan Society of Mechanical Engineers and The Heat Transfer Society of Japan
Previous article Next article
feedback
Top