日本機械学會論文集
Online ISSN : 2185-9485
Print ISSN : 0029-0270
ISSN-L : 0029-0270
空気マイクロメータ内の流体の作動 : 第1報, 小口径固定絞りの特性 その1,圧縮性を無視できる場合
中山 泰熹
著者情報
ジャーナル フリー

1960 年 26 巻 171 号 p. 1485-1492

詳細
抄録
Using 5 types of rounded nozzles, 24 types of cylindrical nozzles (l/d=0.799∼16.520, l : length, d : diameter) and 5 types of knife-edged orifices of 0.3mm to 1.2mm diameter, the discharge characteristics were investigated for Reynolds number from 550 to 10000, using distilled water and low-pressure air. The results are summarized : 1. Discharge coefficients, which were calculated the basis of experiments using distilled water and low-pressure air, fall on the same curves, if arranged by Reynolds number and l/d. 2. Discharge coefficients for each type of nozzle or orifice were collected and one experimental formula was worked out. 3. Downstream pressure of nozzle or orifice is reduced to a minimum at a position of about 1.2 times the pipe diameter and is recovered at about 5 times the pipe diameter. 4. Recovery rate of pressure is about 1.7m (m : area ratio) for rounded nozzle and 1.2m for others.
著者関連情報
© 社団法人日本機械学会
前の記事 次の記事
feedback
Top