日本機械学会論文集 A編
Online ISSN : 1884-8338
Print ISSN : 0387-5008
TiN薄膜の機械的特性に及ぼす成膜後基板焼入れ時の加熱時間の影響
田邉 裕貴三好 良夫高松 徹相良 秀一
著者情報
ジャーナル フリー

2005 年 71 巻 706 号 p. 891-896

詳細
抄録

A specimen which substrate was quenched after TiN coating was prepared, and the effects of heating time in the post quenching on the mechanical properties of TiN film were investigated. The residual stress and the hardness of TiN film were decreased with increasing the heating time in the substrate post quenching. The adhesive strength and the substrate hardness were increased by the substrate post quenching. With increasing the heating time, they once increased and then became constant from a heating time. In order to improve the adhesive strength and the substrate hardness with minimizing the decreases of the residual stress and TiN hardness, it is necessary to quench the steel substrate in the minimum heating time in which the adhesive strength and the substrate hardness are improved.

著者関連情報
© 社団法人日本機械学会
前の記事 次の記事
feedback
Top