Orientation profiles of fibers in fiber suspension flow between two parallel plates with a square cylinder on the center axis was studied by using the computer image analysis. The orientational order parameter S decreases near the square cylinder because the flow changes its direction and also a wake is developed, while it is large near the channel wall owing to high shear deformation. The preferred angle and S decrease in the downstream vicinity of the square cylinder, and reach fully-developed values at a farther area. S along the channel center axis increases with increasing a fiber concentration and the Reynolds number. The size of a square cylinder has an effect on the fiber orientation near the cylinder. Since a stagnation region and a large wake are developed before and after a cylinder for a viscoelastic fluid, a lower value of S near the cylinder is obtained for the viscoelastic fluid compared to that for a Newtonian fluid. At a downstream area, however, the viscoelastic fluid gives a higher values of S.