Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Bulk Glassy Alloys in (Fe, Co, Ni)-Si-B System
Tao ZhangAkihisa Inoue
Author information

2001 Volume 42 Issue 6 Pages 1015-1018


Multicomponent Fe75−xyCoxNiySi8B17 glassy alloys were found to exhibit a distinct glass transition, followed by a supercooled liquid region before crystallization in a rather wide composition range of 7.5 to 45 at%Co and 7.5 to 60 at%Ni. The largest value of the supercooled liquid region defined by the difference between the glass transition temperature (Tg) and crystallization temperature (Tx), ΔTx (=TxTg) was 54 K for Fe30Co30Ni15Si8B17. Furthermore, the high reduced glass transition temperature (TgTm) above 0.60 was obtained in the range of 15 to 30 at%Co and 37.5 to 52.5 at%Ni in the series of Fe75−xyCoxNiySi8B17. The use of Fe30Co30Ni15Si8B17 with a large ΔTx of 54 K and a high TgTm of 0.65 enabled us to produce bulk glassy rods with diameters up to 1.2 mm. The Tg, Tx, saturated magnetization (4πIs), and coercive force (Hcj) of the as-cast 1.2 mm rod alloy are 780 K, 834 K, 0.90 T, and 3.0 A/m, respectively. In addition, the cast glassy rod exhibits Young’s modulus of 110 GPa, compressive fracture strength of 2800 MPa and fracture elongation of 1.9%. It is noticed that the thermal stability, magnetic properties and mechanical properties are nearly the same as those for the melt-spun glassy ribbon. The first synthesis of Fe–Si–B base bulk glassy alloys with good soft magnetic properties and high mechanical strength is promising for the future development as a new type of engineering material.

Information related to the author
© 2001 The Japan Institute of Metals and Materials
Previous article Next article