Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Tensile Properties and Press Formability of a Mg-9Li-1Y Alloy Sheet
Hirohiko TakudaShiomi KikuchiNoriyuki YoshidaHaruo Okahara
Author information

2003 Volume 44 Issue 11 Pages 2266-2270


The formability of an experimentally produced Mg-9%Li-1%Y alloy sheet with a thickness of 0.6 mm is investigated. Uniaxial tension tests and some fundamental press-forming tests, such as stretching, deep-drawing, and bore-expanding tests, are carried out at room temperature. The sheet has sufficiently high ductility under uniaxial tension. However, ductility decreases with an increase in strain rate. Even at room temperature, the flow stress is also sensitive to the strain rate. The stress and the work-hardening rate increase with the strain rate. The strain rate sensitivity affects the formability in press forming. The critical punch stroke in the stretching test decreases with an increase in punch speed. However, the limit drawing ratio increases with the punch speed due to the increase in the work-hardening rate. The Erichsen value is estimated to be 9 mm, and the limit drawing ratio is 2.15. It may be concluded that the sheet has sufficiently high formability.

Information related to the author
© 2003 The Japan Society for Technology of Plasticity
Previous article Next article