Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Improvement of Creep Strength of 9CrODS Martensitic Steel by Controlling Excess Oxygen and Titanium Concentrations
Satoshi OhtsukaShigeharu UkaiMasayuki FujiwaraTakeji KaitoTakeshi Narita
Author information

2005 Volume 46 Issue 3 Pages 487-492


The effects of chemical compositions (titanium, oxygen) and consolidation temperature on high-temperature mechanical properties of 9Cr-oxide dispersion strengthened steel (9CrODS steel) were investigated. A possible high-temperature strengthening mechanism of 9CrODS steel was discussed based on the experimental results. Creep strength of 9CrODS steel at 973 K was remarkably improved when titanium concentration was 0.35 mass%. A higher amount of added titanium than 0.2 mass% was effective for providing consistently reliable manufacturing of high strength 9CrODS steel because it reduced the effect of oxygen contamination on high-temperature strength. The fraction of elongated δ-ferrite grains, which had an ultra-fine oxide particle dispersion, tended to increase with increasing titanium. The elongated grains were considered to improve creep strength of 9CrODS steel. It was also found that creep strength was degraded by elevating the consolidation temperature from 1423 K to 1473 K.

Information related to the author
© 2005 The Japan Institute of Metals and Materials
Previous article Next article