Online ISSN : 1347-5320
Print ISSN : 1345-9678
Active Hydroxyl Groups on Surface Oxide Film of Titanium, 316L Stainless Steel, and Cobalt-Chromium-Molybdenum Alloy and Its Effect on the Immobilization of Poly(Ethylene Glycol)
Yuta TanakaHaruka SaitoYusuke TsutsumiHisashi DoiHachiro ImaiTakao Hanawa
Author information

2008 Volume 49 Issue 4 Pages 805-811


The concentrations of hydroxyl groups located inside and on the surface oxide films of a commercially pure titanium, cp-Ti, a type 316L austenitic stainless steel, SS, and a cobalt-chromium-molybdenum alloy, Co-Cr-Mo, were evaluated using X-ray photoelectron spectroscopy, XPS, and a zinc-complex substitution technique. As a result, the concentrations of the hydroxyl groups detected by the zinc-complex substitution technique, defined as active hydroxyl groups, were much larger than those detected by other conventional techniques. The concentration of the active hydroxyl groups on Co-Cr-Mo was significantly larger than those on cp-Ti and SS. Poly(ethylene glycol), PEG, is a biofunctional molecule that inhibits the adsorption of proteins. The immobilization of PEG to metal surfaces by electrodeposition or immersion is an important technique to biofunctionalize the metals. The amounts of the PEG layer immobilized on the metals were governed by the concentrations of the active hydroxyl groups on each surface oxide in the case of electrodeposition; it was governed by the relative permittivity of the surface oxide in the case of immersion. The estimation of active hydroxyl groups on the surface oxide film with the zinc-complex substitution technique is useful for the elucidation of reactions between metal substrates and immobilized molecules.

Information related to the author
© 2008 The Japan Institute of Metals and Materials
Previous article Next article