Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Effect of Surface Contamination on Solid-State Bondability of Sn-Ag-Cu Bumps in Ambient Air
Ying-Hui WangTadatomo Suga
Author information

2008 Volume 49 Issue 7 Pages 1508-1512


Two solid-state bonding methods, thermocompression bonding (TCB) and surface activated bonding (SAB), were used for studying the effect of surface contamination on the bonding of Sn-Ag-Cu bumps in ambient air. The surface contamination was analyzed by X-ray photoelectron spectroscopy. Correlated to the surface contamination, the influence of Ar-plasma pretreatment time as well as the air exposure time on the shear strength was investigated in SAB process. The bonding of Sn-Ag-Cu bumps was achieved at 25–200°C benefiting from dispersing the surface contamination. With an Ar-plasma activation process prior to the assembly under a low-vacuum background, the carbon contaminants on the bump surfaces in SAB process was removed, and the required bonding pressure or temperature to achieve a high shear strength and bond yield is lower than that in TCB process.

Information related to the author
© 2008 The Japan Institute of Metals and Materials
Previous article Next article