Bendability of Weld Metal —Development of Application Technology of Tailor-Welded Blanks 1st Report—

Abstract

To decrease car body weight and improve crash safety, tailor-welded blanks are often used for the car body materials. In the past, little research has been conducted on the formability of the weld metal (WM). This study focuses on the bendability of the WM and evaluates it by the bending test. The main results are as follows. (1) The bendability of the laser-welded specimens was better than that of the plasma-welded specimens. (2) The bendability of the weld line (WL) was related to the homogeneity of the WM structure, and it increased with increasing homogeneity. (3) The surface roughness of the WL has no effect on the bendability of the WL. (4) The deformation of the bent surface of the WL changed with the WL width, and the bendability increased as the WL narrowed because the bent surface showed increasing uniaxial stretching deformation.

 

This Paper was Originally Published in Japanese in J. JSTP 59 (2018) 33–38.