MATERIALS TRANSACTIONS
Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678

この記事には本公開記事があります。本公開記事を参照してください。
引用する場合も本公開記事を引用してください。

Key Factor for the Transformation from hcp to 18R-Type Long-Period Stacking Ordered Structure in Mg Alloys
Masafumi MatsushitaTakafumi NagataJozef BednarcikNorimasa NishiyamaShoya KawanoSatoshi IikuboYuji KubotaRyo MorishitaTetsuo IrifuneMichiaki YamasakiYoshihito KawamuraMasanori EnokiHiroshi Ohtani
著者情報
ジャーナル フリー 早期公開

論文ID: M2018213

この記事には本公開記事があります。
詳細
抄録

Cast Mg85Y9Zn6 has an 18R-type LPSO structure. However, Mg85Y9Zn6 recovered after being subjected to a loading pressure of 7 GPa at 973 K shows a fine dual-phase structure composed of a face-centered cubic (fcc) structure showing a superlattice (D03), as well as a hexagonal close-packed structure (hcp:2H). The D03/hcp structure transformed to 18R-type LPSO during heating at ambient pressure. In this research, the transformation process from the D03/hcp structure to 18R-type LPSO structure was discussed by means of in situ XRD and first-principles calculation. At first, lattice volume of 2H increased with an increase in the temperature, because of the Zn and Y emitted from the D03 phase into the 2H lattice. After the volume expansion of 2H lattice, the structure collapsed due to insert of random stacking faults (SFs). Then, a formation of 18R-type LPSO structure occurred. Based on a first-principles calculation for pure Mg, volume expansion of the 2H lattice causes the transformation to an 18R structure. Furthermore, the results of free energy calculations for the hcp and fcc structures in the Mg–Y–Zn ternary system show that the segregation of Y and Zn atoms on SFs occurs by the Suzuki effect. These segregated Y and Zn atoms in SF layers, which have a local fcc structure, create a synergy between the stacking and chemical modulations. Present result insists that the volume increase of 2H lattice takes place first, and then the transformation from the hcp structure to 18R stacking occurs.

著者関連情報
© 2018 The Japan Institute of Metals and Materials
feedback
Top