Journal of the Magnetics Society of Japan
Online ISSN : 1882-2932
Print ISSN : 1882-2924
ISSN-L : 1882-2924
Power Magnetics
Effects of Magnetic Field Applied During Heat Treatment on Magnetic Properties of Non-Oriented Electrical Steel Sheets
T. KinoshitaK. KoharaH. ShimojiT. SatoT. Todaka
著者情報
ジャーナル オープンアクセス

2018 年 42 巻 3 号 p. 83-89

詳細
抄録

  To improve the magnetic properties of non-oriented electrical steel sheets, the effects of applying heat treatment in a magnetic field on controlling the crystallographic orientation were studied. The heat treatment temperature was controlled to be 1023, 1123, and 1273 K. The magnetic field applied during the treatment was parallel to the rolling direction of sheet samples, and the magnetic field strength was 10 T at maximum. The samples heat treated in a magnetic field under the temperature condition of 1123 K or higher showed a remarkable change in magnetic properties as the textures changed. Even when a magnetic field was not applied, the grain growth was accelerated by heat treatment, iron loss was reduced, and permeability under low excitation conditions was improved. However, the permeability at 1.6 T or higher decreased. In this paper, it is shown that iron loss could be further reduced by applying a strong magnetic field during the cooling step of the heat treatment. It is also found that applying a strong magnetic field throughout the heat treatment, i.e. heating and cooling, inhibited grain growth, increased iron loss, and decreased magnetic permeability.

著者関連情報
© 2018 The Magnetics Society of Japan
前の記事 次の記事
feedback
Top