溶接学会誌
Online ISSN : 1883-7204
Print ISSN : 0021-4787
構造用材料の溶接変形におよぼす溶接諸条件の影響
佐藤 邦彦寺崎 俊夫
著者情報
ジャーナル フリー

1976 年 45 巻 4 号 p. 302-308

詳細
抄録

It is well known that welding deformations influence strength and ductility of weldments. In the present report, attention is forcussed to the effect of welding conditions, such as weld heat input, physical and mechanical properties of materials, size of weldment etc, on welding deformations in surfacing weld. Parameters which dominates welding deformations are deduced by the use of theories of heat flow and thermoelasto-plasticity. Experiments are carried out under various conditions, changing weld heat input, plate thickness and material, for investigating the effect of those parameters on welding deformations.
From this study. the following informations are obtained.
(1) Welding deformations are determined by the following parameters;
(a) Heat input T0*0Q/cρεY0h2
(b) Initial temperature θi*0θiY0
(c) Temperature above which yield stress becomes zero θM*0θMY0
(2) Welding deformations are determined by parameter Q/h2, θi when material is same.
(3) In the case of mild steel, welding deformations are not depend on welding processes such as GMAW, GTAW, SMAW and SAW, when Q/h2 is less than or nearly equal to 2500 cal/cm3.
(4) Conventionale formulae to calculate welding deformations are derived from the theory and experimental results.

著者関連情報
© 一般社団法人 溶接学会
前の記事 次の記事
feedback
Top