溶接学会論文集
Online ISSN : 2434-8252
Print ISSN : 0288-4771
変動荷重下における溶接割れに対する実験的考察
井元 泉中西 保正堀川 浩甫
著者情報
ジャーナル フリー

1989 年 7 巻 3 号 p. 319-325

詳細
抄録

In recent years, bridge and highways have been, occasionally damaged because of increased in the volume of traffic and/or the gross weights of vehicles, and therefore it has been often become neccesary to perform welding for repair and reinforcement work, if possible in daytime without traffic control.
In this study, the welding crack by the pulsating load in bridge under service condition was studied under the welding crack test by the pulsating load, the trans-varestraint test for weld metal and the high temperature tensile test for weld metal.
The following main results were obtained;
1) The welding crack by pulsating load is hot crakcs in solidification-liquid mixed and solidification, and often occur due to external strain caused by pulsating load.
2) The welding crack in solidification occurs more than about 1100°C.
3) The critical loading strain of welding crack are follows; D4316, D5816 : About 1% in solidification-liquid mixed
D4316:About 2% in solidification
D5816:About 3% in solidification

著者関連情報
© 一般社団法人 溶接学会
前の記事 次の記事
feedback
Top