溶接学会論文集
Online ISSN : 2434-8252
Print ISSN : 0288-4771
傾斜機能溶射皮膜の温度落差繰り返し熱衝撃特性
福本 昌宏山崎 隆典溝部 研悟梅本 実岡根 功
著者情報
ジャーナル フリー

1991 年 9 巻 4 号 p. 568-574

詳細
抄録

In the study of the functionally gradient material (FGM) systems as for the high temperature structural materials, designing of these and evaluation of their thermal shock properties under the temperature gradient condition would be the most essential problems to be investigated. In this study, ZrO2/NiCrAlY functionally gradient plasma sprayed coatings were produced on the stainless steel substrates. Simple heating-cooling thermal shock testing apparatus was made, and repeated thermal shock resistance properties of the coating specimens under the temperature gradient conditions were investigated using this apparatus. Conventional thermal shock test regulated by JIS was also conducted. Moderate coating configuration for minimizing the thermal stress were estimated by the simple analytical model.
The results obtained are summarized as follows,
(1) Feasibility of the functionally gradient coating were verified by the temperature gradient thermal shock testing conducted using the simple apparatus made.
(2) The effect of coating configuration on the repeated thermal shock resistance properties could be evaluated by the temperature gradient test condition.
(3) From the results of simple numerical analysis, the moderate coating configuration profile of the functionally gradient coatings was given as the compositional distribution parameter P of less than 1.

著者関連情報
© 一般社団法人 溶接学会
前の記事 次の記事
feedback
Top