1186. 大規模シミュレーションによる稠密炉心内気液二相流特性の解明,(II)

2チャンネル流体混合実験への適用

抄録

A detailed gas-liquid two-phase flow analysis code based on an advanced interface-tracking method has been developed. It is expected that the developed code would be able to simulate two-phase cross flow behavior within tight-lattice fuel bundles without relying on any empirical correlations. In order to verify the applicability of the code to simulate twophase cross flow behavior in such situations, numerical analyses of 2-channel model tests were conducted to compare the air slug deformation and separation behavior caused by cross flow through a narrow interconnection between channels. Although the code underestimated the ascending velocity of the slug, the calculated slug deformation and separation behavior were shown to be quite similar to those observed by a high-speed video camera. Moreover the minimum differential pressure between the subchannels through the interconnection, causing channel-to-channel air transfer to occur could be predicted to within 20Pa. However, further studies of modeling and implementation related to the interface-channel wall interaction, such as a contact angle of a gas-liquid interface at the channel wall, are required for prediction improvements. Nevertheless, the qualitative capability of the developed code to simulate two-phase cross flow phenomena was demonstrated.