鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
相変態・材料組織
2軸引張のその場SEM/EBSD観察試験法の開発
久保 雅寛吉田 博司上西 朗弘鈴木 清一中澤 嘉明浜 孝之宅田 裕彦
著者情報
ジャーナル フリー HTML

2019 年 105 巻 1 号 p. 86-95

詳細
抄録

For the further improvement of the press formability of steel sheets, it is important to clarify the relationship between macro mechanical properties and microstructure under multi-axial deformation state. The objective of this work is to develop the experimental system of in-situ observation and analysis for biaxial tensile deformation using electron back scatter diffraction patterns (EBSD) with scanning electron microscope (SEM). The appropriate shape of cruciform specimen for the system was examined first by using finite element analysis, and the biaxial tensile test system in vacuum SEM chamber was developed. In-situ observation of microstructure during equibiaxial tensile deformation was then conducted using the developed system and the proposed cruciform specimen. The material used in this study was an interstitial-free steel. It was validated by the comparison with the results obtained by the Marciniak type macro test that the developed system realized equibiaxial tensile deformation. Finally, some information obtained from SEM and EBSD analysis was illustrated. It was found for example that the grains with {001} plane orientations deformed easily and might cause the surface roughness.

Fullsize Image
著者関連情報
© 2019 一般社団法人 日本鉄鋼協会
前の記事 次の記事
feedback
Top