鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
論文
過包晶鋼鋳片の中心偏析形成時におけるP濃度がリン化鉄の晶析出に及ぼす影響
原田 寛 杉本 憲弥高山 拓也
著者情報
ジャーナル オープンアクセス HTML

2026 年 112 巻 6 号 p. 308-318

詳細
抄録

Among the internal defects of cast steel products, the centerline segregation deteriorates the ductility and fatigue strength of high strength steel. Therefore, exact understanding of formation mechanism of centerline segregation and development of the countermeasure technologies are necessary. Kurosawa et al. reported that iron phosphide could be observed in the center-segregated region of high phosphorous and hyper-peritectic steel slabs. However, the precipitation mechanism of iron phosphide has not been fully clarified. Therefore, in this study, in order to clarify the precipitation mechanism of iron phosphide in the final solidification of CC slab, the melting behavior of the center-segregated region of high phosphorous and hyper-peritectic steel slab has been investigated by using high temperature observation equipment installed with the image furnace. Additionally, the enrichment of solute in the interdendritic region and the further enrichment of solute element during the final solidification was modelized by using micro- and macro-segregation model. In Fe-C-P ternary eutectic solidification system, the effect of phosphorous concentration on the precipitation mechanism of iron phosphide during the formation of centerline segregation was discussed.

Fullsize Image
著者関連情報
© 2026 一般社団法人 日本鉄鋼協会

This article is licensed under a Creative Commons [Attribution 4.0 International] license.
https://creativecommons.org/licenses/by/4.0/
前の記事 次の記事
feedback
Top