Tetsu-to-Hagane
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
Regular Article
Emission Characteristics of Okamoto-cavity Microwave-induced Plasma Using Nitrogen-Argon Mixed Plasma Gas
Gen KANEHISAKazuaki WAGATSUMAYukio OKAMOTO
Author information
JOURNAL OPEN ACCESS

2007 Volume 93 Issue 2 Pages 121-127

Details
Abstract

An Okamoto-cavity microwave-induced plasma (MIP) with nitrogen-argon mixed gas was investigated to employ an alternative excitation source instead of the conventional nitrogen plasma. The emission intensities of atomic emission lines of copper and iron having small excitation energy were clearly elevated by adding argon gas to the nitrogen plasma, giving the maximum intensity at the argon mixing ratio of 40%. On the other hand, the excitation temperature, which was estimated from Boltzmann plots using Fe I emission lines ranging from 358 to 380 nm, was hardly changed when the amount of argon increased up to 50%. Also, the ionic-to-atomic intensity ratios of calcium, magnesium, and yttrium were not changed so much by mixing the argon gas. These results concerning the excitation temperatue as well as the ionic-to-atomic ratio imply that the excitation characteristics of the N2-Ar MIP are similar to those of the N2 MIP. However, it was observed that the emitting zone of the N2-Ar MIP could be expanded compared to the N2 MIP. Energetic argon species, which are produced through collisions with electrons and nitrogen species, can expand the plasma region due to their smaller cross-section compared to nitrogen molecule species, and then can take part in excitation collisions of analyte atoms at the outer zone of the plasma, leading the increased emission intensities of the analyte atoms.

Content from these authors
© 2007 The Iron and Steel Institute of Japan

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
Previous article Next article
feedback
Top