Tetsu-to-Hagane
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
Examination of Slab Temperature Change, Rolling Power and Rolling Capacity in a Hot Strip Mill with Mill Arrangement Equivalent to Semi Continuous Type
Natsuo HATTAJun-ichi KOKADO
Author information
JOURNALS FREE ACCESS

1981 Volume 67 Issue 1 Pages 133-142

Details
Abstract

A mathematical model is proposed for the mill arrangement equivalent to semi continuous type in a hot strip mill. The rolling schedule is arranged so that a slab is rolled from 230 mm into 60 mm in bar thickness by reversibly three passes roughing and 60 mm into 1.2 mm, 2.0 mm and 2.5 mm in final thickness by seven passes finishing. The possibility of rolling in this case is analytically examined in due consideration of slab weight, temperature change, rolling power, rolling capacity and rolling speed. As a result, the rolling of the comparably heavy slab with 30 t/m in unit weight is enabled, and the temperature condition is sufficiently fulfilled. The length of the rolling mill line can be geometrically shortened very much in comparison with the case of other type hot strip mill.

Information related to the author
© The Iron and Steel Institute of Japan
Previous article Next article
feedback
Top